Installation - Hisense AW0823TW1W Use And Installation Manual

Installation

1
Attaching the Top Rail
NOTE: For certain models, top rail had been attached by
manufacturer.
□ Locate the bag of screws provided.
□ Place the top rail (HH) on top of the air conditioner cabinet,
lining up the 4 holes in the top rail with the 4 holes on top
of the air conditioner cabinet.
□
Using four 3/8 inch (10 mm) screws (EE), attach the top rail
(HH) to the air conditioner cabinet.
EE
2
Installing the Side Curtains
NOTE: Attach curtains to the air conditioner before placing
the air conditioner in window.
□ Slide the side curtain (GG) directly into the cabinet (B).
□ Slide the side curtain (GG) down.
B
HH
GG
NOTE: Attach side curtains to the air conditioner before
placing the air conditioner in window.
□ Insert top and then bottom of left-hand curtain housing(A)
in top rail (HH) and bottom rails (B) on air conditioner.
A
□ Slide the curtain housing into the rails as far as it will
go.
□ Repeat above steps for the right-hand curtain.
3
Attaching the Adhesive Seal
□ Cut the adhesive seal (gray) (A1) to the width of the lower
window sash (B).
□ Remove the backing from the seal and attach the seal to the
bottom of the lower window sash.
10
HH
A A A
B
B
A1