Turn Off The Display; Display Brightness; Date And Time; Manage Files - Keysight EDU33210 Series User Manual

SCPI Command
SYSTem:CLICk:STATe {ON|1|OFF|0}

Turn off the Display

For security reasons, or to speed up the rate at which the instrument executes remote interface commands, you may
want to turn off the display.
Front Panel Operations
Press [System] > User Settings > Display ON | OFF.
Press any key to turn the display back on.
SCPI Command
DISPlay {ON|1|OFF|0}

Display Brightness

You can set the display brightness to auto dim (100% to 10%) after 2 minutes of inactivity. You may set this feature
from the front panel only.
This setting is non-volatile; it will not be changed by power cycling or *RST.
Front Panel Operations
Press [System] > User Settings > Auto Dimming ON | OFF.

Date and Time

You can set the instrument's date and time clock.
Front Panel Operations
Press [System] > User Settings > Date / Time.
SCPI Command
SYSTem:DATE <yyyy>, <mm>, <dd>
SYSTem:TIME <hh>, <mm>, <ss>

Manage Files

You can perform file management tasks, including copying, renaming, deleting, and creating new folders.
Front Panel Operations
Press [System] > Store/Recall > File Manager.
Keysight EDU33210 Series User's Guide 147