Safety And Emc Requirements; Environmental Conditions - Keysight EDU33210 Series User Manual

Safety and EMC Requirements

This power supply is designed to comply with the following safety and EMC (Electromagnetic Compatibility)
requirements:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU

Environmental Conditions

This instrument is designed for indoor use and in an area with low condensation. The table below shows the general
environmental requirements for this instrument.
Environmental Condition
Temperature
Humidity
Altitude
Pollution degree
Overvoltage Category
Power Supply and Line Frequency
Power Consumption
MAINS Supply Voltage Fluctuations
14
Requirement
Operating condition: 0 °C to 55 °C
Storage condition: –40 °C to 70 °C
Operating/Storage condition: Up to 80% RH at temperatures up to 40 °C (non-
condensing)
Up to 3000 m
2
II
100/120 V, 100/240 V
50/60 Hz
<45 W
Mains supply voltage fluctuations are not to exceed 10% of the nominal supply voltage
Keysight EDU33210 Series User's Guide