Preparing The System - Siemens ARCADIS Orbic Quick Manual

Examination Procedure

Preparing the system

Connecting, switching on and booting
✧
Connect the monitor trolley connecting
cable to the C-arm system (1).
✧
If available, connect the network cable
(if the system is connected to an informa-
tion system or a navigation system or net-
work printer) (2).
✧
Plug the power plug into the power outlet.
✧
Switch on the C-arm system at the moni-
tor trolley (3).
➭
The system boots.
Covering the C-arm with sterile covers
✧
If necessary, cover the C-arm, e.g. with
the two-part sterile cover (4).
✧
Attach the cover with the sterilizable
clamps (5).
19