Siemens ARCADIS Orbic Quick Manual page 59

Postprocessing
Calibrating and measuring distances
❏
Calibrating (1st step)
Activate the calibration function by click-
✧
ing the corresponding button (1).
➭
A green line appears in the image area
which can be lengthened, shortened and
positioned as desired with the mouse (2).
✧
Draw the line along a known distance (2).
➭
As soon as you release the mouse button,
a dialog box appears (3).
✧
Enter the known distance and confirm
with OK (3).
➭
The calibration is shown in the image
area. At the same time, a measuring scale
appears on the right edge of the image.
❏
Measuring distances (2nd step)
Activate the Distance function by clicking
✧
the corresponding button (4).
✧
Using the left mouse button, draw a line
along the required structure.
➭
As soon as you release the left mouse
button, the distance from the start to the
end point of this line is shown (5).
59