Table of Contents
Advertisement
1
Introduction
Safety
WA R N I N G
WA R N I N G
C A U T I O N
4
Isolate or disconnect from mains supply before opening this unit for any
reason. LIVE PARTS INSIDE.
This equipment must be connected to an earthed mains supply. For
continued protection against risk of fire or electric shock, replace
fuses with the same type, rating and UL listing.
This equipment is not suitable for, and must not be used in areas
with flammable mixtures.
Clean the equipment case and front panel with a
non- abrasive non- water based cleaner.
Store or install the equipment within the following
environmental conditions:
Ambient temperature range 5
Relative humidity range
Atmospheric pressure
The unit contains an internal lithium battery that should not
be removed or changed other than by Agilent personnel.
There are no consumable parts associated with the
instrument nor is there any preventative inspection or
maintenance associated with the operation of the
instrument.
There are no user maintainable parts within the instrument.
Should the unit require repair, return it to Agilent
Technolgies; see
"Contact Information"
Do not move the equipment after installation and connection
to a magnet.
o
o
C to 40
C
30% to 95% non- condensing
:700 hPA to 1060 hPA
on page 7.
E5080 Series Cryogen Monitor User Guide
Advertisement
Table of Contents
