How Do I Query The Setting Of A Parameter Before Change; Webui Operations - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual (1350 mm Depth)
Step 2 Set the speed of Indoor fan to 50%.
If the input speed is less than the minimum rotational speed, the indoor fan runs
at the minimum rotational speed.
Step 3 Check that the indoor fan works properly and no alarm is generated.
Step 4 Choose Maint > Diagnostic Mode > Exit or tap
----End
12.3.16 How Do I Query the Setting of a Parameter Before
Change?
On the home screen, choose Maint > Query Logs to query the setting of a
parameter before change. The value before -> is the setting before change, and
the value after -> is the setting after change.
Figure 12-20 Query Logs

12.4 WebUI Operations

Issue 04 (2022-12-15)
NO TE
On the screen for entering the diagnostic mode:
● Components are interlocked for protection. Therefore, buttons for enabling or disabling
certain components may be gray, indicating that operations on the components are not
allowed.
● To ensure system security, a component may not promptly respond to operations
performed on this screen.
● To exit the diagnostic mode, tap
● The system automatically exits the diagnostic mode when it reaches the maximum
diagnostic mode duration.
NO TICE
NO TE
The log query screen displays logs of LCD user operations, including user login and setting
change records.
Copyright © Huawei Digital Power Technologies Co., Ltd.
on the status bar.
to exit the diagnosis mode.
12 FAQ
194