Display Module Screen Operations; How Do I Set Lan Parameters - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual (1350 mm Depth)
Procedure
Step 1 On the home screen, choose Maintenance > USB Operations > Import
Certificate.
Figure 12-11 Importing a security certificate
Step 2 Select Client certificate or Server certificate based on the type of the certificate
in use.
Step 3 Tap Browse next to Upload CA certificate file.
Step 4 Select the CA certificate file to be uploaded.
Step 5 Upload the local certificate file and key file in turn in the same way.
Step 6 Enter Key password and Confirm key password.
Step 7 Tap Submit.
●
●
Step 8 On the home screen, choose Maintenance > USB Operations > Remove USB to
remove the USB flash drive in safe mode.
----End

12.3 Display Module Screen Operations

12.3.1 How Do I Set LAN Parameters?

If the teamwork networking mode is FE networking, set the LAN parameters
based on the actual situation.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > LAN IP Settings, and
set LAN IP assigning mode to Manual. Set LAN IP address, LAN subnet mask,
and LAN gateway based on the actual plan.
Issue 04 (2022-12-15)
If files are imported successfully, a success message will be displayed.
If files fail to be imported, a message indicating the cause for failure will be
displayed. Rectify the fault according to the message and import files again.
Copyright © Huawei Digital Power Technologies Co., Ltd.
12 FAQ
185