Replacing A Wet Film Humidifier - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual (1350 mm Depth)
Step 7 Install the air filter and close the rear door.
Step 8 After startup, choose Maintenance > Performance Maintenance on the home
screen and clear the total number of times that the water inlet solenoid valve is
opened.
Step 9 Check that the smart cooling product is running properly and no alarm is
generated.
----End

11.4 Replacing a Wet Film Humidifier

Prerequisites
●
●
●
Procedure
Step 1 Tap Shutdown on the home screen of the indoor unit display module.
Exercise caution because the device is still energized after it is shut down on the
home screen of the display module.
Step 2 Remove the humidifier.
1.
2.
Figure 11-4 Removing the humidifier
Issue 04 (2022-12-15)
A wet film humidifier needs to be replaced.
A spare wet film humidifier of the same model is available and functional.
The upstream water valve is closed.
NO TICE
Remove the hose clamp and remove the water inlet pipe.
Remove the fastener and remove the wet film humidifier.
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 Component Replacement
159