Table of Contents
Advertisement
Process data (PD)
IEC 61131-9
IODD
IO-Link re-
lated
IO-Link
IO-Link device
IO-Link master
Port
1.3 Overview
SC-LG-CEF Configuration Tool has the following functions.
● IO-Link master detection function
This function detects IO-Link master SC-LG2-CEF-P on the CC-Link IE Field network via a
programmable controller (PLC).
● IO-Link master port configuration function
This function configure a port for IO-Link master SC-LG2-CEF-P that is detected.
● Function for communicating with IO-Link devices via IO-Link master
The following processing can be performed on IO-Link devices connected to IO-Link master
SC-LG2-CEF-P that is detected.
• Reading process data from IO-Link devices and setting some data
• Monitoring the IO-Link device detection status
• Checking diagnosis information for IO-Link devices
● Other functions
Project saving function, language switching function, and other functions
WUME-SCLGCT-3
Term
Cycle data. Process data is automatically transmitted during normal op-
eration.
One of the international certifications handling PLC standards that spec-
ifies an I/O connection technology standardized for communication with
sensors or actuators
Describes the device's own information and settings
A digital communications protocol that connects sensors or actuators to
remote I/O, PLC, etc.
Performs one-to-one and point-to-point IO-Link communications with
the IO-Link master
Plays a role as a gateway to transfer data between each IO-Link device
and each of the systems connected to high-level buses
An IO-Link communication channel port
1.3 Overview
Description
1-3
Advertisement
Table of Contents
