Table of Contents
Advertisement
3.1 Operating Procedure
3.1 Operating Procedure
The procedure for operating SC-LG-CEF Configuration Tool is shown below.
Login (Note 1)
Log in to SC-LG-CEF Configuration Tool.
Start
Select appropriate start options for SC-LG-CEF Configuration
Tool.
Setting a network number (Note 2)
Set a network number for the IO-Link master.
Configuring IO-Link master ports
Configure each port for the IO-Link master.
Selecting IO-Link devices
Select IO-Link devices connected to the IO-Link master.
Specifying various settings and displaying information
Display device information for the IO-Link master, set up IO-
Link devices, and display diagnosis and device information
and graphs for IO-Link devices.
Saving the projects and closing the tool
Save various settings and changed projects and close
SC-LG-CEF Configuration Tool.
Notes: 1) If the Auto Login check box in the Option window is selected, the Login window will not be displayed.
2) When starting SC-LG-CEF Configuration Tool for the first time, set a network number to add an IO-
Link master for which no network number has been set.
3-2
Reference section
"3.2 Login Window"
"3.3 Start Window"
"4.8 Network Number Setting Function"
"3.4.1 Master Port Configuration"
"3.4.2 Select Device Window"
"3.5 Master Information Window"
"3.6 Device Monitoring Window"
"3.7 Device Setup Window"
"3.8 Device Diagnosis Window"
"3.9 Device Information Window"
"4.6 Project Saving Function"
"4.10 Exit Function"
WUME-SCLGCT-3
Advertisement
Table of Contents
