Table of Contents
Advertisement
5.1 Messages
Various confirmation dialog boxes are displayed when the user is asked for confirmation dur-
ing operation or the device enters in an inoperable state. If any message is displayed, carefully
read the following information and check an appropriate action method.
5.1 Messages
Message
IODD file is invalid
The file can't be deleted because XXX is
using
It failed to write the device's parameter.
Loading the setting file is failed
The password you entered is incorrect
The real device and configured device
are different
The data format is wrong.
The real device and configured device
are different
It's a same port number.
It failed to read the port configuration.
The password you entered is incorrect.
It failed to write the port configuration.
5-2
The IODD file that you attempted to import is invalid and so you can-
not import it. Contact the organization from which you obtained the
IODD file.
The IODD file that you want to delete is currently in use, so it cannot
be deleted. Close the project first and then delete the file.
An attempt to write the parameter to the IO-Link device has failed.
Check the connections.
If any error message is displayed, take action according to the mes-
sage.
The file required to start SC-LG-CEF Configuration Tool was not
found. The tool will be started using the default settings.
Enter the same password in both password fields.
The IO-Link device set up with SC-LG-CEF Configuration Tool dif-
fers from the IO-Link device that is actually connected. Check the
tool settings or actual connections.
The format of the entered data is incorrect. Enter data in the correct
format.
The IO-Link device set up with SC-LG-CEF Configuration Tool dif-
fers from the IO-Link device that is actually connected. Check the
tool settings or actual connections.
For the paste target port, specify any port other than the copy source
port.
An attempt to read port settings from the IO-Link master has failed.
Check the connections.
Enter the correct password.
An attempt to write port settings to the IO-Link master has failed.
Check the connections.
Action method
WUME-SCLGCT-3
Advertisement
Table of Contents
