Table of Contents
Advertisement
3.6 Device Monitoring Window
This window is used to monitor process data for the IO-Link device selected in the tree on the
left side of the window.
If you select an IO-Link device in the tree, a device monitoring subwindow will be displayed in
the Monitor tab.
2
Name
1
Update cycle
2
Operation
3
Analog - Item
4
Analog - Upper / Lower
5
Analog - Custom
6
Digital - Item
7
Graph drawing area
WUME-SCLGCT-3
1
3
Digital graph
You can set an update cycle at which a graph is drawn. (Unit: ms)
You can replay, pause, or stop graph drawing.
You can select analog items for which graphs are to be drawn.
Items that you can select are analog items of process data for IO-Link devices.
You can set the upper and lower limit values for analog items for which graphs
are to be drawn.
You can set up a bar of custom values on the graph.
You can select digital items for which graphs are to be drawn.
Items that you can select are digital items of process data for IO-Link devices.
Graphs are displayed by reflecting the settings in "Update cycle", "Operation",
"Analog - Item", "Analog - Upper / Lower", "Analog - Custom", or "Digital -
Item".
3.6 Device Monitoring Window
4 5
6
Analog graph
Description
7
3-11
Advertisement
Table of Contents
