Table of Contents
Advertisement
2.3 Setup on the Programmable Controller (GX Works3) Side
● Setting up RJ71EN71(CCIEF) unit parameters
Set up parameters in the engineering software (GX Works3) at the master station.
In the Navigation window, select Module Information and then RJ71EN71(CCIEF).
1.
Reference
For details on how to set up the master station, refer to the instruction manual of the master station
unit that you use.
Set up the contents of Required Settings for module parameters as shown below.
2.
WUME-SCLGCT-3
2-5
Advertisement
Table of Contents
