Table of Contents
Advertisement
3.7 Device Setup Window
3.7 Device Setup Window
This window is used to set up parameters for the IO-Link device selected in the tree on the left
side of the window.
If you select an IO-Link device in the tree, a device setup subwindow will be displayed in the
Set tab.
Name
1
Process data display area
2
Parameter display area
3
Write
4
Read
5
Write Auto
3-12
1
Process data items are displayed according to the information in the IODD
file of the IO-Link device selected in the tree. The values obtained from the
selected device are displayed as the values of the process data items.
Parameters are displayed according to the information in the IODD file of
the IO-Link device selected in the tree.
buttons are arranged for each item, so that individual items can be
loaded.
If the user changes the value of an item, a red asterisk (*) will be displayed
at the beginning of the item.
Clicking this button writes the parameter value(s) changed in the parameter
display area to the IO-Link device.
Clicking this button reads all the parameter values in the parameter display
area from the IO-Link device.
If this check box is selected, when the value of any parameter displayed
in the parameter display area is changed, the value will be immediately re-
flected in the IO-Link device.
If this check box is not selected, when the value of any parameter dis-
played in the parameter display area is changed, the value will not be re-
flected in the IO-Link device until the Write button is clicked.
3 4 5
Description
2
WUME-SCLGCT-3
Advertisement
Table of Contents
