Table of Contents
Advertisement
3.3 Start Window
3.3 Start Window
This window is used to select appropriate start options and start SC-LG-CEF Configuration
Tool.
1
2
3
4
Name
1
New
2
Open
3
Load from Master
4
Connecting IO-Link Master
5
Start
Reference
For information about how to add IO-Link masters offline, refer to "4.1 Master Addition Function".
3-4
Select this option to set up a new IO-Link master or IO-Link device offline.
Select this option to open the file of a project that has been set up before.
Select this option to load data from an IO-Link master that is connected to
the PC via a PLC.
When this option is selected, the "Connecting IO-Link Master" area can be
manipulated.
A list of IO-Link masters that are connected to the PC via a PLC is dis-
played.
You can select a desired IO-Link master by selecting the check box on the
top left of the frame of the device.
The product name and connecting information [NNo. (network No.), SNo.
(station number)] are displayed. Select the check box on the top left of the
frame of the master that you want to set up.
By clicking the Select All check box, you can select or cancel all the IO-Link
masters that are displayed.
After selecting New, Open, or Load from Master, click this button to start
SC-LG-CEF Configuration Tool.
●
If you select New and then click the Start button, you will be prompted to
select the IO-Link master to be added.
●
If you select Open and then click the Start button, the previously set con-
ditions will be displayed.
●
If you select Load from Master and then click the Start button, the data
of the selected IO-Link master(s) will be loaded. If none of the connected
IO-Link masters is selected, the Start button will be grayed out.
Description
5
WUME-SCLGCT-3
Advertisement
Table of Contents
