Table of Contents
Advertisement
Operation
Learn to handle the engine, controls and other equipment in a safe and proper manner before casting off on your
maiden voyage. Remember to avoid sudden and extreme rudder maneuvers and gear shifts. There is a risk for
passengers and crew falling over or falling overboard.
WARNING!
A rotating propeller can cause serious injury. Check that nobody is in the water before engaging ahead or astern.
Never drive near bathers or in areas where people could be in the water.
47712598 09-2020 © AB VOLVO PENTA
Reading the Instruments
Read all instruments and alarm displays directly after
starting, and then regularly during the voyage.
Alarms
The alarm is shown in two different alarm lists
depending on the cause of the alarm. Alarms
discovered by EMS, ACM and PM are shown in the
ECU Alarmlist, and alarms from the SDM or MCU are
shown in the Alarmlist.
1 Acknowledge the audible alarm by pressing the
Horn Reset button (1).
2 Reading alarms.
To see active alarms, press the up button in the
main menu once for the SDM/MCU alarm list and
twice for the ECU alarm list.
If there are several alarms, browse in the alarm list
using the Enter button.
3 Depress the Acknowledge button (2) to
acknowledge all alarms.
Take the necessary action; refer to the Fault
handling, page 39 section for further information.
Alarm notations remain in the alarm list until they have
been acknowledged and rendered "inactive" (fault
remedied).
33
Hide quick links:
Advertisement
Table of Contents
