Table of Contents
Advertisement
Main Modules with External Indicator Output (N Modules)
I/O
Input
Emergency stop input
Reset input
Feedback input
Auxiliary input
DC solid-state
External indicator output (See note 1.) Connectable indicators: Filament types (incandescent lamp) 24 VDC, 3 to 7 W
output
Auxiliary solid-state output
Note: 1. When external indicators are not connected, connect
resistance (1/4 W, 4.7 k Ω ) between the EL1 terminal and
EL2 terminal. The lead wire resistance (without polarity)
shown in the following diagram is included with the product.
2. LED indicators (ratings: 24 VDC, 0.7 to 7 W) can also be
connected. Diagnostic checks, however, cannot be
performed if LED indicators are connected.
I Main Modules with DC Solid-state Safety Output (E Modules)
Item
Input
Emergency stop input
Reset input
Feedback input
Auxiliary input
DC solid-state output DC solid-state safety output
Auxiliary solid-state output
Note: 1. With an inductive load, connect a diode or other surge absorber parallel to the load.
2. Except for voltage drop due to cable extension.
OMRON SCIENTIFIC TECHNOLOGIES, INC.
USA
Tel. 1/888/510-4357
ON: 15 to 24 VDC ± 10%
OFF: Open or 0 to 5 VDC max.
Internal impedance: Approx. 5 k Ω
PNP transistor output
Load current: 25 mA max.
Residual voltage: 2 V max. (See note 4.)
ON: DC15 to 24 V ± 10%
OFF: Open or 0 to 5 VDC max.
Internal impedance: Approx. 5 k Ω
PNP transistor output
Load current: 300 mA max. (resistance load/inductive load) (See note 1.)
Residual voltage (when ON): 2 V max. (See note 2.)
Residual voltage (when OFF): 0.1 V max.
Leakage current (when OFF): 0.1 mA max.
Allowable capacitive load: 1 µ F max.
Allowable wire resistance between output terminals and load: 4 Ω max.
PNP transistor output
Load current: 25 mA max; Residual voltage: 2 V max. (See note 2.)
Canada
Tel. 1/866/986-6766
Ratings/Characteristics
3. OMRON recommends the following indicators (both have a
power consumption of 5 W).
• PS-24-Y B0568: Manufactured by PATLITE Corporation
(Always use an incandescent lamp as a replacement
indicator. The malfunction monitoring using current
detection will not function if LED indicators are used.)
• ASSC-24: Manufactured by ARROW ELECTRONICS
IND. CO., LTD.
82 dia.
127
PS-24-Y-B0568
(by PATLITE Corporation)
4. Except for voltage drop due to cable extension.
Ratings/Characteristics
For the Latest Information
On the Internet: www.sti.com or www.omron.ca
F3SX
Safety Controllers
66 dia.
115
ASSC-24
(by ARROW ELECTRONICS
IND. CO., LTD.)
EE-97
Advertisement
Table of Contents
