Piper ARCHER III Pilot Operating Handbook page 228

SECTION 9
SUPPLEMENT 5
SECTION 1 GENERAL
This supplement supplies information necessary for the operation of the
airplane when the Bendix/King KX 155A Comm/Nav System is installed in
accordance with FAA approved Piper data.
SECTION 2 LIMITATIONS
No change.
SECTION 3- EMERGENCY PROCEDURES
No change.
SECTION 4- NORMAL PROCEDURES
COMM TRANSCEIVER
(a.). Rotate the volume (VOL) knob clockwise from the OFF position.
(b.) Pull the VOL knob out and adjust for desired listening level.
(c.) Push the VOL knob back in to actuate the automatic squelch.
(d.) Select the desired operating frequency in the standby display by rotating
the frequency select knobs either clockwise or counter-clockwise.
(e.) Push the comm transfer button to transfer the frequency from the
standby to the active display.
NAV RECEIVER
(a.) The right portion of the display is allocated to NAV receiver information.
The frequency channeling is similar to the Comm when operating in the
frequency mode. The NAV increment/decrement knobs are located on
the right hand side of the front panel.
SECTION 5- PERFORMANCE
No change.
SECTION 6- WEIGHT AND BALANCE
See Section 6 of the basic Pilots Operating Handbook.
REPORT: VB-1611
9-28
PA-28-181, ARCHER III
ISSUED: JULY 12, 1995
REVISED: APRIL 3, 1997