Piper ARCHER III Pilot Operating Handbook page 224

SECTION 9
SUPPLEMENT 4
NORMAL PROCEDURES
6. Approaching the FAF inbound (within 2 nm.):
a.
b.
c.
7. Crossing the FAF and APR ACTV is not annunciated:
a
b.
8. Missed Approach:
a.
b.
There is no automatic LEG sequencing at the MAP.
c.
missed approach procedure, press
change the desired holding fix and press ENT.
• The data base must be up to date for instrument
• Only one approach can be in the flight plan at a time.
• If the destination airport is the active waypoint at
• Checking RAIM prediction for your approach while
• Data cannot be altered, added to or deleted from the
• Some approach waypoints do not appear on the
REPORT: VB-1611
9-24
Verify APR ACTV.
Note automatic dbar scaling change from ±1.0 nm to ± 0.3
nm over the 2 nm inbound to the FAF.
Internally the KLN 89B will transition from terminal to
approach integrity monitoring.
Do not descend.
Execute the missed approach.
Climb
Navigate to the MAP (in APR ARM if APR ACTV is not
available).
After climbing in accordance with the published
GENERAL NOTES
approach operation.
the time of the instrument approach selection, the
active waypoint will shift automatically to the
chosen IAF.
en route using the OTH 3 page is recommended. A
self check occurs automatically within 2 nm of the
FAF. APR ACTV is inhibited without RAIM.
approach procedures contained in the data base.
(DME arc intercepts may be relocated along the arc
through the NAV4 or the FPL 0 pages).
approach plates (including in some instances the FAF)!
PA-28-181, ARCHER III
NOTE
[
ISSUED: JULY 12, 1995
REVISED: APRIL 3, 1997
]
verify or
D