Fatal Error Code List; Displaying The Fatal Error Code - Epson WF-2540 Service Manual

WF-2540 / WF-2530 / WF-2520 / WF-2510 / WF-2010 series

1.3 Fatal Error Code List

This section describes how to check the fatal error code, description, and the possible causes.

1.3.1 Displaying the Fatal Error Code

The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment
Program. The code can be displayed on the LCD of the control panel by a special panel operation.
Only the printer fatal error code can be displayed by this panel operation.
For the fatal error codes, descriptions, and their possible causes,
Error Code
The following describes the panel operation for the product to display the fatal error code.
Method of displaying the fatal error code
1. Press the following buttons simultaneously while the fatal error is occurring.
Menu button
Stop button
OK button
2. Check the displayed fatal error code.
Troubleshooting
(p15)".
OK button
Menu button
Figure 1-2. Displaying the Fatal Error Code (1)
Figure 1-3. Displaying the Fatal Error Code (2)
Fatal Error Code List
see" 1.3.2 Printer Fatal
LCD display
FATAL CODE:0x02
Fatal error code
Revision B
Stop button
Confidential
14