Before Starting Work; Preparing The Chain Saw For Operation - Stihl MSA 120 C Instruction Manual

12 Before Starting Work

￭ Like an automobile brake, the chain brake on your chain
saw incurs wear each time it is engaged. In order for the
chain brake on your STIHL chain saw to function properly,
it must be properly maintained. Return the chain saw to
your STIHL servicing dealer for periodic inspection and
servicing of the brake system according to the following
schedule:
– Heavy Usage: every 3 months
– Moderate Usage: every 6 months
– Occasional Usage: every 12 months
￭ Return the chain saw immediately for maintenance
whenever the brake system cannot be thoroughly cleaned
or there is a change in its operating characteristics.
￭ Use of parts that are not authorized or approved by STIHL
may cause serious or fatal injury or property damage.
– STIHL recommends that only identical STIHL
replacement parts be used for repair or
maintenance.
￭ To reduce the risk of electric shock:
– Unplug the charger from the electrical outlet before
inspecting or cleaning the charger.
– Regularly check the charger and ensure that the
insulation of the power cord and plug are in good
condition and show no signs of aging (brittleness),
wear or damage.
– Have a damaged power supply cord replaced by an
authorized STIHL servicing dealer.
0458-716-8621-E
￭ To reduce the risk of short circuit and fire:
– Keep the battery guides free of foreign matter. Clean
as necessary with a dry cloth or soft, dry brush.
￭ Improper storage can result in unauthorized use, damage
to the chain saw, battery and charger, and an increased
risk of fire, electric shock and other personal injury or
property damage.
– Engage the chain brake by moving the front hand
guard forward to
chain saw before storing.
– Never store the chain saw or charger with the battery
inserted.
– Before storing, always unplug the charger from the
electrical outlet and remove the battery.
– Store the chain saw, battery and charger indoors in
a dry, secure place that cannot be accessed by
children or other unauthorized users.
– Never store the battery in the chain saw, in the
charger, in a metal container or in a container with
metal objects (e.g., paper clips, nails, coins, keys).
12 Before Starting Work

12.1 Preparing the Chain Saw for Operation

Before starting work:
► Fully charge the battery, @ 13.2.
► Mount the guide bar and saw chain, @ 15.2.1.
► Tension the chain, @ 15.3.
► Fill the chain oil tank, @ 15.4.2.
► Check the chain brake, @ 19.1.
► Check the controls for proper function and condition,
@ 19.2.
► Check the chain oil flow rate, @ 19.3.
English
and remove the battery from the
35