Heat Pump with Gas Heater backup
Multiple Air Source Heat Pumps
2.10 Initial Heating Recommendations
The following recommendations will reduce the amount of time required to heat a pool. If unsure of
equipment heating capability, review equipment data plate. See "Identifying Model Specifications" on
page 22.
1. Use the heat pump's "POOL/SPA" button to select the "POOL" group.
2. Set circulation pump time clock to 24 hours.
3. Confirm the mode has been set to "HEAT" mode.
4. Set the desired temperature "HEAT SETPOINT" for the water.
5. Use a pool cover or blanket to reduce heating time.
6. After the desired temperature has been reached, reset circulation pump time clock to normal time frame.
Page - 28