Aquacal SQ120R Instruction Manual page 11

Standards
Standards
NFPA 70, Nat'l Elec.
Code 2017
IEC 60335-1
IEC 60335-2
UL 1995 & CSA C22.2
No. 236-15
Table 1 - Standards
Grounding and Bonding
Follow local code requirements for proper grounding and bonding of heat pump equipment.
A bonding lug has been provided on the heat pump.
l
Surge Suppression
The use of approved commercial surge protectors is strongly recommended.
Sizing the Electrical Service
Refer to equipment data plate for specific information required to size electrical service and over-current
protection of the heat pump. Sizing is based on data plate information, wire size, wiring devices, and over-
current protection per applicable local codes and standards.
The electrical installation must conform to the current
version of the National Electric Code (NEC), and all
applicable local and state codes
Household and similar electrical appliances - Safety -
General Requirements
Household and similar electrical appliances - Safety –
Particular requirements for electrical heat pumps, air-
conditioners, and dehumidifiers
Standard for Safety - Heating and cooling equipment
Title
Page - 8