SRC K-VS11-01-01-SL Mounting Instructions

Head light guard-kawasaki versys650 ( 11-14 )

Download this manual

Scope of Supply/Bill of Material & Mounting Drawings

Part Number: K-VS11-01-01-SL / K-VS11-01-02

Part Description: Head Light Guard – KAWASAKI VERSYS650 ( 11 – 14 )

Installation / Parts List / Bill of Material for Mounting

No. Description

1 Head Light Guard

2 Bracket RH

3 Bracket LH

4 Washer M5

5 Screw M5 x 6

6 Screw M5 x 20

SRC Design uses Metric System of Measurement and all dimensions are in Millimeters

* Recommended to use the Torque specified in the table

** Denotes Usage of Liquid Thread Locker in specified locations

Design and Specification are subjected to change

Quantity Torque * (N-m)

5 - 6

Remarks **

Use Liquid Thread Locker

Page 1

Table of Contents

Page 1 5 - 6 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
Page 2: Mounting Drawings
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3: Mounting Instructions
Right-hand and Left-hand side, and kept aside. The Mounting points, will be used for mounting the Bracket RH and LH with SRC’s scope of Mounting fasteners, which will be explained in subsequent steps. Step 2:...
Page 4 Bracket LH (3) and Slide in the Washer M5 (4) – 4 off on each side and Screw M5 x 6 (5) – 4 off on each side. Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5 Ensure Mounting symmetry and tighten the screws to torque as per specifications in the BOM table. Final Mounted condition of the Head Light Guard, is as shown in the drawing above. Copyright By SRC Design and Specification are subjected to change Page 5...
Page 6: General Instructions
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.

K-vs11-01-02