SRC K-VS11-01-01-SL Mounting Instructions page 4

Step 4:
Orient and Align the Head Light Guard
(1), as shown, in-line with the 4 off
Mounting holes in the Bracket RH (2)
and Bracket LH (3) and Slide in the
Washer M5 (4) – 4 off on each side and
Screw M5 x 6 (5) – 4 off on each side.
Copyright By SRC
Design and Specification are subjected to change
Step 3:
Ensure Symmetry of Orientation of the
Bracket RH & LH and secure the threads in
the Mounting Points and tighten them to
torque, as per specifications in the BOM
table.
Page 4