Page 1
Use Liquid Thread Locker Cou ntersunk Washer M8 SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the Torque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
Unscrew the Mounting screws (4 off), as shown in the drawing, and take out STEP 2: Position the Mounting Bush (4) (5) – 4 off, as shown in the drawing, Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Bush M6 18x10 (3) 4 off through the Mounting holes in the Top Rack and, tighten it to the torque . Rear Rack as shown “Final Assembled condition” Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5
50 kilo meters of ride and at regular intervals. 7. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC 8. To the maximum extent possible, our design use the current Mounting/Fitment of the...