Page 1
Rubber Grommet AD F B Head Lig h t Guard SRC Design uses Metric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the T orque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
Page 2
Bush Delrin (4)-2 off and Screw M6x20 (7) – 2 off , and Screw M5x10 (8) – 2 off , and slip-in the Bush Rubber (10) as shown . Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
Orient the Head Light Guard (1), as shown, and slip-in the Rubber Grommet (11) – 4 off and secure the threads. Step 5: The Head Light Guard “As is final Mounted Condition” Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.