Chapter 9 Setting Up And Checking The Multipath Driver; Setting Up And Checking The Eternus Multipath Driver; Setting Up And Checking The Device-Mapper Multipath - Fujitsu ETERNUS DX Configuration Manual

Chapter 9
Setting Up and Checking the Multipath Driver
9.1

Setting Up and Checking the ETERNUS Multipath Driver

For the setup and check procedures, refer to the manual that is provided with the ETERNUS Multipath Driver.
9.2

Setting Up and Checking the device-mapper multipath

Set up and check the device-mapper multipath.
For the procedures, refer to "Configuration Guide -Server Connection- (Fibre Channel/FCoE/iSCSI/SAS) for Linux
device-mapper multipath".
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux
Copyright 2018 FUJITSU LIMITED
21
P3AM-3472-14ENZ0