Overview; Tools To Support Remote Teaching And Learning; Intended Use Of Getting Started Guide; Characteristics And Specifications - Keysight U3900DAQ Getting Started Manual

Overview

Tools to Support Remote Teaching and Learning

U3900DAQ Switching System for Education Lab consist of the DAQ970 data acquisition system (DAQ), this
instrument enabling remote switching measurement point on a DUT (device under test), to provide a
complete hands-on learning for engineering students to measure different points in a training board circuit.
As a web-enabled Solution, it offers engineering solution to enable remote laboratory with simple and
flexible choices of GPIO switches and RF switch multiplexers.
Taking advantage of Keysight DAQ capabilities to link up student computers and the physical lab setup
over the internet which can immediately be deployed.

Intended Use of Getting Started Guide

The Getting Started Guide is intended for use by a University Teaching Lab Manager as a guide for
unpacking, set up, verification, and maintenance of the U3900DAQ Switching System.

Characteristics and Specifications

For more information about the key features and specifications, refer to the DAQ970A/DAQ973A Data
Acquisition System User's Guide at
The respective webpages for the modules are as follows:
– DAQ970A
– DAQM901A
– DAQM903A
– DAQM905A
Keysight U3900DAQ Switching System Lab Solution Getting Started Guide
https://literature.cdn.keysight.com/litweb/pdf/DAQ97-90000.pdf
12