Table of Contents
Advertisement
IMPORTANT: Attempting to compensate for poor installation practices by manipulating the canopy hardware
will result in unsatisfactory workmanship and possibly cause hardware failure and/or injury.
Step 3: Adjust Glass Height
To properly adjust the height of the glass requires that both hinge arms of each section of glass be loosened before
attempting to change the glass position.
Glass must be parallel to ledge when viewed from front
IMPORTANT: Attempting to compensate for poor installation practices by manipulating the canopy hardware
will result in unsatisfactory workmanship and possibly cause hardware failure and/or injury.
Installation (Cont'd)
Glass Height: When
turned clockwise the
front glass will go up.
When turned counter-
clockwise the front
glass will go down.
Front to Back: Loosen to
move, must be tightened
when adjustments are
complete
Glass Height should be centered
on "V" glass seal
8
Advertisement
Table of Contents
