Advertisement
S L P - 5 0 0 G
ASSEMBLY STEPS
S T E P - 1
NOTE: DO NOT TIGHTEN NUTS AND BOLTS SECURLY UNTIL
YOU HAVE COMPLETED ALL ASSEMBLY STEPS.
□ Attach A Weight Stack Frame and D Main Body Frame to В Bottom Pulley Frame.
□ Attach
Q Rear Support Frame to A Weight Stack Frame and D Main Body Frame.
□ Attach
С Front Support Frame to A Weight Stack Frame and D Main Body Frame.
NOTE: Attach Cable End to Top Bolt and D8 Pulley to Bottom before tightening.
□ Attach M and N Handles to D Main Body Frame.
□ Attach
I Adjustable Back Support to D Main Body Frame.
□ Attach
T Pad Brackets to D Main Body Frame.
S T E P - 2
□ Attach Pillow Blocks to D Main Body Frame.
□ Attach E Leg Press Frame to Pillow Blocks.
NOTE: The Cross Beam of Part E Leg Press Frame the end is the bottom this end
attaches to Pillow Blocks.
Pillow Blocks and other Cross Beam hits the Rubber Stopper on D Main
Body Frame.
□ Attach F Front Pulley Frame to
NOTE: The Straigh 90° end goes
□ Attach G Foot Plate Frame to E
NOTE: Part G Foot Plate Frame
angled away from the user.
□ Attach H Foot Plate to G Foot Plate Frame.
CAUTION: DO NOT OVERTIGHTEN PAD BOLTS.
OVERTIGHTENING WILL STRIP
___________ T -N U T S IN THE WOOD. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
S T E P - 3
□ Attach К Back Pad to J Back Pad Frame.
□ Attach L
Seat Pad to D Main Body Frame and T Pad Brackets.
□ Slide J Back Pad Frame into I Adjustable Back Support.
□ Attach 0 Chrome Guide Rod and D6 Rubber Donuts to A Weight Stack Frame.
□ Slide Weight Stack and D15 Chrome Top Plate
□ Attach P
Top Pulley Frame to A Weight Stack and attach DIO Shaft Collar.
S T E P - 4
□ Attach Pulleys and Cables as shown.
□ Attach End Caps. Grips and No— Slip Tape.
□ TIGHTEN ALL NUTS AND BOLTS SECURELY.
□ Attach Bolt Caps.
______________________________ SAFETY R U LES_________________________________________
1. Periodically check that all nuts,bolts and screws are fully tightened on
your LEG PRESS MACHINE.
2. Exercise with care. Perform your exercises at a smooth moderate pace;
never perform jerky or uncoordinated movements that may cause injury.
3. It is recommended that you should workout with a training partner.
4. Warning: CONSULT YOUR PHYSICIAN BEFORE STARTING YOUR EXERCISE
PROGRAM. IT IS ADVISABLE TO HAVE A PHYSICAL EXAMINATION BEFORE YOU
ENTER ANY EXERCISE PROGRAM. FOR YOUR OWN SAFETY, DO NOT BEGIN
ANY EXERCISE WITHOUT PROPER INSTRUCTION.
LEG PRESS MACHINE
D Main Body Frame.
to the bottom.
Leg Press Frame and F Front Pulley Frame.
so the top of the Foot plate is
PAGE 4
onto 0
Chrome Guide Rods.
slightly
Advertisement
