SSG 500 M Series Hardware Installation and Configuration Guide
Web User Interface Conventions
Juniper Networks Documentation
8
Juniper Networks Documentation
To perform a task with the WebUI, you first navigate to the appropriate dialog box,
where you then define objects and set parameters. A chevron ( > ) shows the
navigational sequence through the WebUI, which you follow by clicking menu
options and links. The set of instructions for each task is divided into navigational
path and configuration settings.
The following figure lists the path to the address configuration dialog box with the
following sample configuration settings:
Objects > Addresses > List > New: Enter the following, then click OK:
Address Name: addr_1
IP Address/Domain Name:
IP/Netmask: (select), 10.2.2.5/32
Zone: Untrust
Figure 1: Navigational Path and Configuration Settings
To obtain technical documentation for any Juniper Networks product, visit
www.juniper.net/techpubs/.
For technical support, open a support case using the Case Manager link at
http://www.juniper.net/support/
1-408-745-9500 (outside the United States).
If you find any errors or omissions in this document, please contact us at the email
address below:
techpubs-comments@juniper.net
or call 1-888-314-JTAC (within the United States) or