Nortel BCM50 Installation Manual page 65

Table 19 Capabilities and Preferences - User Speed Dial screen fields (Continued)
Setting Values
Facility Use prime line
Use line
Pool
Use routing table
Actions
Add 1. On the System DNs table (Capabilities and Preferences tab), choose the DN record where you
want to add User Speed dials.
2. Under the User Speed Dial Numbers table, click the Add button.
3. Enter the appropriate speed dial number.
4. Click OK in the dialog box.
5. On the User Speed Dial , click on the External # field beside the number you entered.
6. Enter an external number to dial.
7. Click on the Facility field beside the number you entered.
8. Enter how the number needs to be routed out of the system.
Delete 1. On the System DNs table (Capabilities and Preferences tab), choose the DN record where you
want to delete User Speed dial entries.
2. On the User Speed Dial Numbers table, the user speed dial code or codes that you want to delete.
3. Click the Delete button.
4. Press OK in the confirmation box.
Description
Select the route you want the dialed number to take out of your system.
Note: Any line numbers or line pool codes that you specify must be
assigned to the telephone where the code is entered.
If you choose prime line, a prime line must be assigned to the telephone
where the code is entered.
Refer to "Line Access - Line Assignment tab" on page
63
47.
DN records parameters