Nortel BCM50 Installation Manual page 31

The following table defines the fields on this screen and indicates the lines.
Table 5 Loop settings
Attribute Value
SPIDS table
SPID
Digits <digits>
Number of 1, 2
B-channel
Actions
Add (SPID digits) 1. Select the appropriate SPID (1 or 2)
2. Click the Add button.
3. Enter the SPID digits supplied by your ISDN service provider.
4. Click OK in the dialog box.
5. On the table, click on the Number of B-channels field beside the number you entered.
6. Choose the number of B channels allowed for this SPID.
Delete 1. Select the SPID that you want to delete.
2. Click the Delete button.
3. Press OK in the confirmation box.
Network DNs table
DN <system DN>
Call Type Voice
Data
Both
Description
This indicates which of two possible SPIDS is being programmed.
Supplied by your service provider.
System running with T1 country profiles (North American) support
additional BRI services offered by ISDN service providers and defined by
network service profile identifiers (SPIDs). The SPID allows you to enter a
network connection that provides a path for voice or data services
North American BRI loops can support two B-channels. The SPID may be
the same or different for the channels.
This ISDN DN acts as the contact point for the loop to the system.
Defines the type of calls supported on the loop.
BRI ISDN: BRI loop properties
29