Mercedes-Benz Metris Operating Instructions Manual page 231

Indicator and warning lamps in the instrument cluster
Safety systems
Warning/ N Signal type
indicator
Possible causes/consequences and M Solutions
lamp
N $ (USA only) or J (Canada only): the ABS and brake warning lamps
$J
are lit while the engine is running.
ò
EBD is unavailable due to a malfunction. ABS, BAS, hill start assist and ESP
well as its driving safety systems, for example, are therefore also unavailable.
ATTENTION ASSIST is deactivated and other driving systems could be automati-
cally deactivated.
G
WARNING
The brake system continues to function normally, but without the functions lis-
ted above. The wheels could therefore lock prematurely if you brake hard, for
example.
This causes steerability and braking to be greatly impaired. The braking distance
may increase in emergency braking situations.
®
If ESP is not operational, ESP
There is an increased risk of skidding and accidents.
X
Switch the engine off, wait briefly and start the engine again.
X
Check if the display message has disappeared and ESP
X
If the display message continues to be displayed:
Drive on with care.
R
Visit a qualified specialist workshop immediately.
R
N The red $ (USA only) or J (Canada only) brake system warning lamp is
$J
lit while the engine is running. An additional warning tone sounds.
There is insufficient brake fluid in the brake fluid reservoir.
G
WARNING
Braking performance can be impaired.
There is a risk of an accident.
X
Stop the vehicle immediately, paying attention to road and traffic conditions.
Do not continue driving under any circumstances.
X
Secure the vehicle to prevent it from rolling away (
X
Do not add brake fluid. Adding more will not remedy the malfunction.
X
Consult a qualified specialist workshop.
X
Observe the display messages.
®
will not stabilize the vehicle.
Y
page 138).
229
®
as
®
is operational.
Z