Mercedes-Benz Metris Operating Instructions Manual page 81

The sliding door is equipped with an active
retainer, which engages the door at the end
stop when opened.
If the vehicle is equipped with two electric slid-
ing doors; the 5 button on the SmartKey
can only be used to open or close one of the
Y
two sliding doors ( page 80).
X
To open: pull door handle : in the direc-
tion of the arrow.
or
X
Press the 5 button on the SmartKey for
longer than 0.5 seconds.
The sliding door unlocks, automatic opera-
tion is started and the sliding door opens. In
addition, you will hear two warning signals.
X
To close: pull door handle : in the direc-
tion of the arrow.
or
X
Press the 5 button on the SmartKey for
longer than 0.5 seconds.
The sliding door is released from its lock
and automatic operation is started. The slid-
ing door closes.
If you press the 5 button on the Smart-
Key, you will hear two warning signals while
the doors close.
X
To interrupt automatic operation: pull
door handle : again.
or
X
Press the 5 button on the SmartKey
again.
i In unfavorable operating conditions, e.g.
frost, ice or heavy soiling, you can press and
hold the relevant sliding door button. The
electric sliding door moves with increased
force. Observe that, in such circumstances,
the obstacle detection is less sensitive. To
stop the movement, release the sliding door
button.
Opening/closing from the inside
If the sliding door is unlocked, you can open
and close the sliding door from the inside with
these controls:
the Å or Æ sliding door button in the
R
front on the lower center console
the sliding door button on the B-pillar next
R
to the door sill
the rocker switch on the door handle
R
Electric sliding door
Sliding door button for the sliding door on
:
the left-hand side
Sliding door button for the sliding door on
;
the right-hand side
Rocker switch
=
Locking knob
?
Sliding door button in the door frame
A
You can only open a sliding door from the
inside if the child-proof locks have not been
activated. If the sliding door is locked, the slid-
ing door must first be unlocked.
The sliding door is equipped with an active
retainer, which engages the door at the end
stop when opened.
X
To open: briefly press the respective Å
or Æ sliding door button in the center
console.
or
X
Briefly press sliding door button A in the
door frame.
or
X
Briefly pull back rocker switch =.
If the sliding door is unlocked, automatic
operation is started and the sliding door
opens.
If you use the Å or Æ sliding door
button in the center console you will hear
79
Z