Mercedes-Benz Metris Operating Instructions Manual page 87

G
WARNING
The reversing feature does not react:
to soft, light and thin objects, e.g. fingers
R
while adjusting
R
This means that the reversing feature can-
not prevent someone being trapped in these
situations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the W
button to open the side window again.
Opening and closing the side win-
dows
Power window, left
:
Power window, right
;
The switches on the driver's door take prece-
dence.
X
To open manually: press and hold the cor-
responding switch.
X
To open fully: press the switch beyond the
point of resistance and release it.
Automatic operation is started.
X
To close manually: pull the corresponding
switch and hold it.
X
To close fully: pull the corresponding
switch beyond the point of resistance and
release it.
Automatic operation is started.
X
To interrupt automatic operation: press/
pull the corresponding switch again.
You can continue to operate the side windows
after switching off the engine or removing the
SmartKey. This function remains active for
Side windows
about five minutes or until you open a front
door.
Convenience opening feature
You can ventilate the vehicle before you start
driving. To do this, the key is used to carry out
the following functions simultaneously:
to unlock the vehicle
R
to open the side windows
R
The convenience opening feature can only be
operated using the key. The key must be close
to the driver's door handle.
X
Convenience opening: point the tip of the
key at the driver's door handle.
X
Press and hold the % button until the
side windows are in the desired position.
X
To interrupt convenience opening:
release the % button.
Convenience closing feature
G
WARNING
When using the convenience closing feature,
parts of the body could be trapped in the
closing area when a side window is being
closed. There is a risk of injury.
Observe the complete closing procedure
when the convenience closing feature is
operating. Make sure that no body parts are
in close proximity during the closing proce-
dure.
When you lock the vehicle, you can close the
side windows at the same time.
The key must be close to the driver's door
handle.
Observe the notes on the automatic reversing
feature for the side windows (
X
Convenience closing feature: point the tip
of the key at the driver's door handle.
X
Keep the & button pressed until all side
windows are fully closed.
X
Make sure that all side windows are closed.
X
To interrupt convenience closing feature:
release the & button.
85
Y
page 84).
Z