Mercedes-Benz Metris Operating Instructions Manual page 193

On-board computer (vehicles with steering wheel buttons)
X
Press a to confirm.
The current setting is displayed.
X
To change the setting: press a again.
X
Press : or 9 to set Deactivated,
Standard or Sensitive.
X
Press a to confirm the choice.
If ATTENTION ASSIST is activated, the À
symbol is shown in the status area of the
Standard
display. The selection
tive sets the sensitivity with which the sys-
tem determines the attention level.
Further information can be found under
Y
"ATTENTION ASSIST" ( page 155).
Activating/deactivating Blind Spot
Assist
Using the steering wheel buttons
X
Press = or ; to select the
menu.
X
Press : or 9 to select
Assist.
X
Press a to confirm.
The current status is shown.
X
To activate/deactivate: press the a
button again.
Further information can be found under "Blind
Y
Spot Assist" ( page 151).
Setting Lane Keeping Assist
Using the steering wheel buttons
X
Press = or ; to select the
menu.
X
Press : or 9 to select
ing Assist.
X
Press a to confirm.
Standard
The current selection
tive
is displayed.
X
To change the setting: press a again.
Further information can be found under "Lane
Y
Keeping Assist" ( page 153).
Service menu
Sensi‐
or
Depending on the vehicle's equipment, you
have the following options in the
menu:
Calling up display messages in the message
R
memory (
Assist.
Restarting the tire pressure loss warning
R
system or checking the tire pressure elec-
Blind Spot
tronically (
Calling up the service due date (ASSYST
R
PLUS) (
Settings menu
Introduction
Assist.
Lane Keep‐
Adap‐
or
Depending on the vehicle's equipment, you
have the following options in the
menu:
changing the display options in the
R
Cluster
changing the time and date in the
R
Date
changing the exterior and interior lighting
R
settings in the
( Y page 193)
Service
Y
page 209)
Y
page 285)
Y
page 258)
Settings
Y
submenu ( page 192)
Y
submenu ( page 192)
Lights
submenu
191
Inst.
Time/
Z