Sanyo FWZH776F Owner's Manual page 44

Default Gateway : Manual
Select "Default Gateway" using [ K / L ], then
7.
press [ OK ].
• Default gateway Address entry window will
appear.
8. Enter the default gateway Address using
[ the Number buttons ].
9. Press [ OK ] when at the Cell to the far right.
• Please move on to 'DNS Setting'.
DNS Setting DNS Setting
DNS Setting : Auto(DHCP)
Select "DNS Setting" using [ K / L ], then press [ OK ].
1.
• You will be asked to Select "Auto(DHCP)" or "Manual".
Select "Auto(DHCP)" using [ K / L ], then press [ OK ].
2.
• Please move on to 'Proxy Setting' if your ISP (Internet
Service Provider) requires Proxy Configuration.
Otherwise, move on to 'Connection to the Network'.
DNS Setting : Manual
Select "DNS Setting" using [ K / L ], then press [ OK ].
1.
Select "Manual" using [ K / L ], then press [ OK ].
2.
• Please move on to 'Primary DNS : Manual'.
Primary DNS : Manual
Select "Primary DNS" using [ K / L ], then press [ OK ].
3.
• Primary DNS Address entry window will appear.
4. Enter the primary DNS Address using
[ the Number buttons ].
5. Press [ OK ] when at the cell to the far right.
• Please move on to 'Secondary DNS : Manual'.
Secondary DNS : Manual
Select "Secondary DNS" using [ K / L ], then press [ OK ].
6.
• Secondary DNS Address entry window will appear.
Enter the Secondary DNS Address using [ K / L ]
7.
or [ the Number buttons ].
• Enter the Secondary DNS Address after checking
the specifications of your Router, then enter the
same Numbers in the cells.
8. Press [ OK ] when at the cell to the far right.
• Please move on to 'Proxy Setting' if your ISP (Internet
Service Provider) requires Proxy Configuration.
Otherwise, move on to 'Connection to the Network'.
EN - 44
Proxy Setting Proxy Setting
Proxy Address
Select "Proxy Setting" using [ K / L ], then press
1.
[ OK ]
Select "Use" using [ K / L ], then press [ OK ].
2.
• Proxy Address entry Screen will appear.
3. Enter the Proxy Address using the Software
Keyboard.
• For details on how to use the Software Keyboard,
refer to 'Guide to the Software Keyboard' on page
42.
4. Press [ OK ]
• Proxy Port Number Input Window will appear.
Proxy Port
5. Enter the Proxy Port Number using [ the Number
buttons ].
Select "OK" using [ K / L ], then press [ OK ].
6.
Connection Test Connection Test
Select "Connection Test" using [ K / L ], then
1.
press [ OK ].
• Connection test will Start and the test result will be
Displayed.
2. Press [ OK ].