Display Message; Front Panel Display - Sanyo FWZH776F Owner's Manual

Display Message

: Appears when
the Disc Tray is
Opening.
: Appears when
the External Input
is L1.

Front Panel Display

: Appears in the afternoon with the Clock
PM
1
Display. (Nothing appears in the morning.)
2 Title / track / file and Chapter mark
: Appears when indicating a Title / track / file
number.
: Appears when indicating a Chapter
number.
3 Current status of the unit
F
: Appears when Playback is paused.
B
: Appears when Playing an HDD, External
HDD or disc.
: Appears when the Scheduled Programming
or OTR has been set and is proceeding.
: Flashes when Scheduled Programming
Entire
was not executed because of some error.
Display
: Appears during Recording process.
: Flashes when a Recording pauses.
Entire
Display
: Appears when a disc is in this unit.
DB
: Appears during Dubbing.
: Appears when the unit is in HDD mode or
HDD
External HDD mode.
DVD
: Appears when the unit is in DVD mode.
: Appears when
the Disc Tray is
closing.
: Appears when
the External Input
is L2.
: Appears when another Remote Control Code is being
received.
2
BS CS
PM
1
4
DR CD
VCR
3
DB HDD
DVD
4 Displays the following
• Elapsed Playback Time
• Current Title / Chapter / track /file number
• Recording Time / remaining Time
• Clock
• Channel number
• Remaining Time for One-Touch Timer Recording
Note(s)
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have an RF modulator.
• Do not connect any devices other than the External
HDD or the USB memory stick into the USB input.
• USB memory stick can be used only for a Software
Update.
(USB card reader, MP3 player, Digital camera, PC,
keyboard, mouse, etc. cannot be used.)
• When connecting an External HDD or USB memory
stick, connect it directly to the USB input. Do not
use a USB extension Cable.
• Make sure to Power-Off this unit and the External
HDD before disconnecting the External HDD.
EN
: Appears when a
disc is loaded on
the Disc Tray or
checking for a disc
on the Tray.
: Appears when
the External Input
is L2-S.
EN - 11