Viewing Tv; While Viewing Tv; Channel Selection; Input Selection - Sanyo FWZH776F Owner's Manual

4. VIEWING TV

While Viewing TV

Channel Selection

Select a Channel using [ CH +/− ] or [ the Number
buttons ] on the Remote Control.
Using [ CH +/− ]
Press [ CH + ] and [ CH − ] to Switch up and down
through the memorized Channels.
Using [ the Number buttons ]
Press [ 0 ] - [ 9 ] A [ . ] A [ 0 ] - [ 9 ] to go directly to a
Channel.
Enter the Main and Sub-Channel Numbers using [ the
Number buttons ] to Select a Channel.
For 1-digit Main Channel number + Sub-Channel
number
e.g.) [ 2 ] + [ . ] + [ 1 ] = Ch 2.1
For 2-digit Main Channel Numbers + Sub-Channel
number
e.g.) [ 3 ] + [ 5 ]+ [ . ] + [ 1 ] = Ch 35.1

Input Selection

You can Switch the appropriate Input.
Using [ SOURCE ]
Press [ SOURCE ] to Display the current Input Source.
Then press [ SOURCE ] Repeatedly to Select a desired
Input Source.
EN - 26
G

Detailed Information on the Program

You can check the information on the TV Program that
is currently On-Air.
1
Press [ INFO ] while viewing a TV
Program.
1
1. Channel number / Broadcast station
2. Program Title
3. Sound Mode
4. Audio Language
(Indicates the Language currently Selected.)
5. Program Rating
6. Closed Caption
(Indicates the Program being broadcast has Closed
Captioning available.)
Note(s)
• In some cases, DTV Closed Caption function on
the unit may not work even when the Closed
Caption Icon is Displayed. In such case, check the
Closed Caption setting on your TV (Only if the unit
is connected to a TV with the RCA Video / Audio
Cables).
• The Display will automatically disappear in 20
seconds.

Audio Languages

You can Switch Audio Language while viewing a Digital TV
Program.
1
Press [ AUDIO ] while viewing a TV
Program.
• Available Languages will be Displayed.
2
Select a Language using [ K / L ], then
press [ OK ].
• Available Languages will vary depending on the
TV Program.
2
4
3
6
5