Sanyo FWZH776F Owner's Manual page 31

3
Enter the Date using [ K / L ], then
press [ 1 (Cursor)].
1/1
Daily
TUE-SAT
When pressing [ L ] at the
Current Date, the Date
MON-SAT
will change as follows.
MON-FRI
e.g.) January 1st
W-SAT
W-FRI
W-SUN
1/31
4
Enter the Start and End Time
and Select "AM" or "PM" using
[ K / L / 0 / 1 ], then press [ 1 (Cursor)].
• You cannot make a Scheduled Recording
Program that exceeds 8 hours.
5
Select a Channel or External Input to
Record using [ K / L / 0 / 1 ], then press
[ 1 (Cursor)].
6
Select the Recording Media ("HDD"
or "External HDD" or "DVD"), then
press [ 1 (Cursor)].
7
Select the "Mode(XX)" using [ K / L ],
then press [ OK ]
• Select a desired Recording mode.
8
Select the "Folder Setting" using
[ K / L ], then press [ OK ]
• Select a desired Folder to store the Recorded
Program.
• If you have no Folder to store the Recorded
Program, Select "New Folder" and enter the
Folder name using the On-screen Software
Keyboard.
Alternate Recording Alternate Recording
In the following cases, the unit will detect and
automatically Record to the HDD even when External
HDD or DVD is Selected as the Recording Media.
– If External HDD is not connected.
– If there is no Recordable Disc in the unit.
– If the External HDD or DVD does not have enough
space to complete the Recording.
– The unit cannot Record to the connected External
HDD (External HDD is unregistered).
– If the material is "copy-once" program and
prohibited to be Recorded on a DVD.
– If the Disc is not available because the Repairing
Process was Cancelled halfway.
This feature is only available for Scheduled Recording
and not available for One-Touch Timer Recording.
9
When all items are entered, Select
"OK", then press [ OK ] again.
Your Program Setting is now Stored.
• To set another Program, repeat step
• Press [ (EXIT) ] to Exit.
• When 2 or more Programs are overlapped, an
error message appears and the overlapped
Program will be Displayed in Blue with an
Icon on the left side.
• To correct the Scheduled Program, refer to
'Checking, Deleting or Correcting the Scheduled
Programming information' on page 32.
Note(s)
• If you have not set the Clock yet:
Entry screen for the Clock Setting will appear
instead of the Scheduled Programming List at step
1. Continue with the steps in 'Clock Setting' or
'Auto Clock Setting' on page 59 before setting a
Scheduled Programming.
• Use [ 0 / 1 ] to move the cursor to the left and
the right in the entry screen for the Scheduled
Programming.
• You cannot make a Scheduled Recording Program
that exceeds 8 hours.
to
2 2 9.
Continued on next page.
EN - 31
EN