NETGEAR PS101 Reference Manual page 47

NetGear Print Server Manual
To set up each PC:
1. Double-click on the desktop icon, as showing Figure 4-8, that you named the group in the previous
section, Figure 4-5.
2. Double-click on NETGAER Print Server Setup Wizard in the NETGEAR Print Server window.
The NETGAER Print Server window opens, as illustrated below.
3. In this window, you will see whatever network protocols you have installed on the local machine.
You need TCP/IP to use web management. Most nowadays operating systems including Microsoft
Windows 98, ME, 2000, and XP use TCP/IP as the primary networking protocol.
PS101 and PS111W do not support NetWare IPX/SPX environment.
Older system, like Microsoft Windows 3.1, may support only Netbios protocol as the Microsoft Network.
You must have either TCP/IP or Netbios protocol, or both to use NETGAER PS100 Series print server.
Figure 4-10 NETGEAR Print Server Setup Wizard Window
38