Physical Port Tab - NETGEAR PS101 Reference Manual

NetGear Print Server Manual
String Before Provides the control character string to send to the printer before the first character of the job is sent to the
Job printer. One example of such an application would be switching to landscape mode when printing to the
logical port. The character string must be in hexadecimal format as in these examples:
ASCII = [Esc]&l0O
Hexadecimal = 1B266C304F
ASCII = [Esc]&l1O
Hexadecimal = 1B266C314F
String After Provides the control character string to send to the printer after the last character of the job is sent to the
Job printer. The character string must be in hexadecimal format as illustrated in the String Before Job example
above.

Physical Port Tab

This tab allows you to set the "Handshake Signal" used for communication between the Print Server
Physical Port
107