NETGEAR PS101 Reference Manual page 109

NetGear Print Server Manual
System Tab Fields
Field Description
Device Choose a descriptive name for the router for identification purposes (for example, EngPrsv). This name is
Name used in all protocols to identify the specific print server. There is a factory default name. For any change,
NETGEAR recommends that a name be determined before setting the print server in any network. This
name should be no more than 16 characters with at least a non numeric letter. Spaces are not allowed, but
dashes (-) and underscore marks (_) are accepted.
IPX/SPX Choose to enable or disable the IPX/SPX protocol used in the NetWare environment. This selection is
Protocol always shadowed to indicate that the IPX/SPX protocol is always active and cannot be disabled.
TCP/IP Choose to enable or disable the TCP/IP protocol. TCP/IP is used for UNIX networking and Microsoft
Protocol networking. The factory default is Enable.
NetBEUI Choose to enable or disable the NetBEUI protocol. NetBEUI is primarily used in a small-scale Microsoft
Protocol networking environment.
AppleTalk Choose to enable or disable the AppleTalk Protocol. AppleTalk is used in small networks of Apple
Figure 8-4 System Tab Window
100