E.g. Event Control - Omron FS-B4KU7DGES-F Product Specifications And User's Manual

10.16 Event Control
The camera internal signal can be output as specified event information, like "exposure end", to PC used by
GVCP (GigE Vision Control Protocol).

e.g. Event control

Notified "Exposure End"
Exposure Active
Sensor Read Out
GenICam Parameters
Event Selector
Event Notification
FS-B4KU7DGES-F / FS-B4KU7DGES-M42 / FS-B2KU7DGES-F / FS-B2KU7DGES-M42 / FS-B2KU7DGES-C
Product Specifications and Use's Guide
GVCP
Event Exposure Start
Event Frame Start
IEnumeration Event notification selection
Type Selection: FrameTrigger, FrameStart, FrameEnd,
IEnumeration Event notification ON / OFF selection
Type On: Enable event notification
Off: Disable event notification
Event Exposure End
Line0InputRisingEdge, Line0InputFallingEdge,
Line1InputRisingEdge, Line1InputFallingEdge,
Line2InputRisingEdge, Line2Input FallingEdge,
BlockDiscard, ActionLate, AcquisitionTriggerMissed,
FrameTriggerMissed, LineTriggerMissed, FrameTimeout,
OverrunEvent
No.20S048-00
Event Frame End
44/62