Table of Contents
Advertisement
Measurement
[ASF 1]
Additional Secondary Factors
[ASF 2]
Additional Secondary Factors
Advanced settings menu
The advanced settings menu allows you to specify some advanced settings
for engine dials and wind data response times.
1.
[Maximum RPM] — Select to specify a maximum RPM for your engine
dials, or allow the system to automatically configure the Maximum RPM.
2. [Custom RPM red zone] — Enable toggle to allow selection of a custom
red zone for engine RPM dials.
3. Custom RPM red zone field — With [Custom RPM red zone] enabled you
can specify the RPM at which the red zone begins.
4. [Wind angle response] — Select to change the rate at which wind angle
data is updated. The setting can be adjusted from 1 to 15. The higher the
value the faster the update rate.
5. [Wind speed response] — Select to change the rate at which wind speed
data is updated. The setting can be adjusted from 1 to 15. The higher the
value the faster the update rate.
Dashboard app
Units
-9.9 to +9.9
-9.9 to +9.9
Page settings menu
The page settings menu allows you to configure data overlays and, when
applicable, adjust the position of the split on pages containing multiple apps.
1.
[Edit data overlays] Fore details refer to:
2. [Edit split ratio] Fore details refer to:
p.34 — Data overlays
p.63 — Editing the splitscreen ratio
309
Advertisement
Table of Contents
Troubleshooting
