Cabling; Figure 7-3 Pci Card Carrier Front Panel - Sun Microsystems Netra ft 1800 Hardware Reference Manual

Fault and Power
LEDs
Injector lever
FIGURE 7-3
7.2

Cabling

The SAI/P cable with box assembly supplied with the SAI PCI card must be secured
entirely within the host rack. It is VW-1 rated cable, and as such must not be
installed in vertical cable trays or routed from one rack/cabinet to another adjacent
cabinet. I/O cables coming into the host frame to mate with the SAI/P breakout box
must meet the applicable local fire codes (for example, have a CL2 or CM Listing
mark denoting, among other things, that it complies with vertical-tray flame test
requirements).
7-4 Netra ft 1800 Hardware Reference Manual • April 1999
PCI Card Carrier Front Panel