Table of Contents
Advertisement
SE-3 Electrocardiograph Service Manual
presence of flammable gas:
Working mode:
EMC:
Environment:
Temperature:
Relative Humidity:
Atmospheric
Pressure:
Power Supply Specifications:
1) Mains Supply:
Operating Voltage: 100V-115V~ / 220V-240V~
Operating Frequency: 50Hz/60Hz
Input Power: 35VA
2) Built-in Rechargeable Lithium Battery Pack:
Rated voltage: 14.8V; Rated capacity: 2200mAh
3) Power Consumption: 35VA (max)
4) Fuse Specification: T400mA 250V Ø5×20 / T200mA 250V Ø5×20
2.3 Warnings and Cautions
In order to service the system safely and effectively, and avoid the possibility of injury, please
read the user manual and this service manual in detail and be sure to be familiar with proper
service methods. The following precautions must be paid more attention to during the service
procedure.
Note:
1. This device is not intended for home use.
2. The pictures and interfaces in this manual are for reference only.
of flammable gas
Continuous operation
Group І, Class A
Transport & Storage
-20 ºC ~ +55 ºC
25% ~ 93%
Non-Condensing
700hPa ~ 1060hPa
- 7 -
Safety Guidance
Working
5 ºC ~ 40 ºC
25% ~ 80%
Non-Condensing
860hPa ~ 1060hPa
Advertisement
Table of Contents
